Elevocharge Typ 2 EV Verlängerungskabel |32A|7.2kW/22kW|5M/8M/10M
- Regulärer Preis
- $179.99
- Verkaufspreis
- $179.99
- Regulärer Preis
Description
An extension cable for Type 2 AC charging: it adds extra reach between your existing charging cable and your car. Available in 7.2kW single-phase or 22kW three-phase, 5 m, 8 m or 10 m.
It is built for setups where the charger’s own cable is just too short, for example a wall-mounted unit with a fixed cable, or a car parked further from the charger than usual. It has a socket end for your existing cable’s plug and a plug end for your vehicle, and a locking mechanism to help keep the connection from working loose.
Before you buy:
- This is an extension only. It does not replace a charging cable or a charger.
- Some vehicle and charger manufacturers advise against using extension cables, or may not cover damage caused by them. Check your car’s and charger’s manuals first.
- Charging power is limited by the lowest-rated part of the whole chain (car, charger, existing cable, extension)
【Adds reach where your charger’s cable falls short】:A 5 m, 8 m or 10 m extension helps with fixed-cable chargers, kerbside parking, tight garages or inlets on the far side of the car. You add only the length you need, so measure the extra distance, not the total.
【Locking mechanism for a steadier connection】:The integrated lock is designed to keep the connectors together while charging, reducing the chance of the joint working loose when the cable is pulled or knocked. (Manufacturer-stated. It is a connection aid and not an anti-theft device.)
【Tough PC+ABS housing】:The housing is PC+ABS and flame-retardant to UL94 V-0 (manufacturer-stated). The manufacturer states it withstands up to 2.5 tonnes of pressure, which suits daily use in a garage or driveway. It is not designed to be driven over on purpose.
【Choose the power that matches your setup】:7.2kW single-phase suits typical home and single-phase charging. 22kW three-phase is for three-phase equipment. Buying the higher rating only helps if your car, charger and supply can use it.
【UNIVERSAL COMPATIBILITY】:Designed to work seamlessly with all IEC 62196 Type 2 BEVs and PHEVs, compatible with Type 2 AC charging cables, wallboxes, and portable EV chargers — giving you flexibility no matter what charging equipment you use.
Compatible Vehicles
Compatible with all Type 2 (IEC 62196) BEVs and PHEVs, including but not limited to:
- Tesla Model 3 / Model Y
- Volkswagen ID.3 / ID.4
- BYD Atto 3 / Seal / Sealion
- BMW i-Series
- Audi e-tron
- Mercedes-Benz EQ Series
- And all other vehicles equipped with a standard Type 2 charging port
What’s in the box
- Cable, Bag, Cleaning Towel, User Manual
How to use
- Confirm that your vehicle and charger manuals allow extension cables.
- Stop any active charging session and make sure the existing cable is unplugged from the car.
- Insert the plug of your existing charging cable into the extension’s socket end and engage the lock.
- Insert the extension’s plug end into your car’s charging inlet.
- Start charging at the station or via its app.
- To finish, stop the session, unplug the vehicle end first, release the lock and separate the connectors.
- Keep connectors clean and dry and store the cable loosely coiled.
Specification
| Product type | EV charging extension cable |
|---|---|
| Connector Type | Type 2 socket end to Type 2 plug end |
| Rated Current | 32A |
| Maximum power | Up to 7.2kW/Up to 22kW |
| Available Lengths | 5M / 8M / 10M |
| IP Rating | IP54 |
| Shell Material | PC+ABS |
| Fire Resistance | UL94 V-0 |
| Pressure Resistance | Up to 2.5 tonnes |
| Insertion Cycle Rating | 10,000+ tested plug-in/plug-out cycles |
| Safety Feature | Integrated locking mechanism |