ELEVOCHARGE Type 2 to Type 2 EV Charging Cable | 32A | 7.2kW / 22kW | 5M / 7M / 10M
- Regular price
- $169.99
- Sale price
- $169.99
- Regular price
Description
Mode 3 Type 2 to Type 2 EV charging cable for AC charging at home, at work and at public stations. Choose 7.2kW single-phase or 22kW three-phase, in 5 m, 7 m or 10 m.
This cable connects a charging station or wallbox with a Type 2 socket to a vehicle with a Type 2 inlet. The weather-resistant TPU jacket is made for everyday outdoor use, and a carry bag keeps it tidy in your boot.
Before you buy: Charging speed is set by your car’s onboard charger, the station’s output and your power supply, not by the cable alone. Check your vehicle’s inlet type and maximum AC charging rate in the manual. Not sure which power or length you need? See Which version should I choose? below.
【Two power ratings, one cable design】:Pick 7.2kW single-phase (32A) for typical home and single-phase setups, or 22kW three-phase (32A) if your car, station and supply can use it. You only pay for the capability you can actually use.
【Three lengths for different parking setups】:5 m suits most driveways and kerbside posts. 7 m gives extra room for angled bays, wall units on the far side of a garage or inlets on the opposite side of the car. 10 m is for awkward layouts where the charger is far from the parking spot. Measure the route from your charger to your car’s inlet first, including the bend around the car.
【UNIVERSAL COMPATIBILITY】:This Type 2 to Type 2 cable (Mode 3, IEC 61851-1 / Mennekes connector) is compatible with all BEVs and PHEVs equipped with a Type 2 charging port — including popular models such as Model 3/Y, Sealion 7, 7X, Atto 1-3, EX5, MG4, and more. Use it safely at any public or private Type 2 charging station or wallbox.
【BUILT FOR SAFETY】:Certified to CE, TÜV, and RCM standards. The rugged TPU housing is IP-rated for weather resistance and UL94V-0 fire-retardant rated, giving you confidence to charge outdoors — rain, heat, or cold — without worry. The cable also resists abrasion and stays flexible in a wide temperature range.
【PLUG AND PLAY DESIGN】:Power rating and voltage information is clearly marked at the base of each plug, so you always connect the correct end with confidence. Simple, intuitive, and tested for long-term reliability — rated for 10,000+ no-load insertion cycles.
【COMPLETE CHARGING KIT】:Every cable comes with a carrying bag, a cleaning cloth, and a securing strap — everything you need to keep your setup organized, protected, and easy to store in your trunk. Lightweight and portable, so you can charge at home, at the office, or wherever you go.
What’s in the box
- 1 × ELEVOCHARGE Type 2 to Type 2 EV charging cable (power and length as selected)
- 1 × Carry bag
- 1 × Strap
- 1 × Cleaning cloth
How to use
- Park and switch the vehicle off as your car’s manual directs.
- Plug the cable’s station end into the Type 2 socket on the wallbox or public charger.
- Plug the vehicle end into your car’s charging inlet.
- Start the session with the station’s app, card or controls (depends on the station).
- When finished, stop the session, unplug the vehicle end first, then the station end.
- Wipe the connectors if wet or dusty, coil loosely and store in the bag.
Specification
| Item | 7.2kW version | 22kW version |
|---|---|---|
| Product type | EV charging cable | EV charging cable |
| Connectors | Type 2 to Type 2 | Type 2 to Type 2 |
| Charging mode | Mode 3 (AC) | Mode 3 (AC) |
| Maximum power | Up to 7.2kW | Up to 22kW |
| Rated current | 32A | 32A |
| Phases | Single-phase | 3-phase |
| Rated voltage | Up to 250V AC | Up to 480V AC |
| Operating Temperature | -35°C to 50°C | -35°C to 50°C |
| IP Rating | IP55 | IP65 |
| Outer material | TPU | TPU |
| Flame-retardant rating | UL94 V-0 | UL94 V-0 |
| Standard | IEC 62196-2 | IEC 62196-2 |
| Certifications | CE, TÜV, RCM | CE, TÜV, RCM |
| Plug durability | 10,000+ no-load plug-in/out cycles | 10,000+ no-load plug-in/out cycles |